精密车削中心热误差和切削力误差综合建模

吴昊; 杨建国; 张宏韬

您当前的位置：

首页 >

文章列表页 >

精密车削中心热误差和切削力误差综合建模

机械工程 | 更新时间：2023-11-28

- 精密车削中心热误差和切削力误差综合建模
- Synthetically Modeling for the Thermal Error and Cutting Force Induced Error on a CNC Turning Center
- 工程科学与技术 2008年40卷第2期页码：165-169
- 作者机构：
  
  上海交通大学机械与动力工程学院上海,200240
- 作者简介：
- 基金信息：
  
  高等学校全国优秀博士学位论文作者专项资金资助项目（200131）
- DOI：
  中图分类号：
- 纸质出版日期：2008，
扫描看全文
吴昊,杨建国,张宏韬.精密车削中心热误差和切削力误差综合建模[J].工程科学与技术,2008,40(2):165-169.

Synthetically Modeling for the Thermal Error and Cutting Force Induced Error on a CNC Turning Center[J]. Advanced Engineering Sciences, 2008,40(2):165-169.
吴昊,杨建国,张宏韬.精密车削中心热误差和切削力误差综合建模[J].工程科学与技术,2008,40(2):165-169. DOI：

Synthetically Modeling for the Thermal Error and Cutting Force Induced Error on a CNC Turning Center[J]. Advanced Engineering Sciences, 2008,40(2):165-169. DOI：

摘要

中文摘要: 热误差和切削力误差是影响数控机床精度的最重要的两个误差源，误差补偿技术是一种消除机床误差经济有效的方法，而有效的误差补偿依赖于准确的误差模型。在对切削加工过程中的热变形和切削力分析的基础上，选取合理的参量，采用BP神经网络和PSO算法相结合的优化方法建立了热误差和切削力综合模型。BP PSO建模方法改善了网络模型的收敛速度和预测精度。基于所建误差模型，对一台精密车削中心加工实时补偿后使得径向加工误差从27 μm提高到8 μm，大大提高了车削加工中心的加工精度，验证了模型精度。

Abstract

Abstract:Thermal deformation and cutting force induced deformation of the machine tool structure are two most significant causes of machining errors

and error compensation technique is an effective way to improve the manufacturing accuracy of the NC machine tools. Effective compensation relies on an accurate error model that can predict the relevant errors during machining. Since a PSO BP neural network modeling technique was developed to build the error model of thermal error and cutting force induced error. The PSO BP neural network model not only enhances the prediction accuracy of the thermal errors but also reduce the training time of the neural networks. Experimental results showed that the machining error of a turning center has been reduced from 27 μm to 8 μm.

关键词

热误差切削力误差粒子群算法精密车削中心

Keywords

thermal errorcutting force induced errorPSO algorithmNC machine tool

references

Weck M,Mckeown P,Bonse R.Reduction and compensation of thermal error in machine tools[J].Annals of the CIRP,1995,44(2):589-598.

Ni Jun.A perspective review of CNC machine accuracy enhancement through real-time error compensation[J].China Mechanical Engineering,1997,8(1):29-33.[倪军.数控机床误差补偿研究的回顾及展望[J].中国机械工程,1997,8(1):29-33.]

Yang Jianguo,Zhang Hongtao,Tong Hengchao,et al.The application of real-time thermal error compensation on NC machine tools[J].Journal of Shanghai Jiaotong University,2005,39(9):1389-1392.[杨建国,张宏韬,童恒超,等.数控机床热误差实时补偿应用[J].上海交通大学学报,2005,39(9):1389-1392.]

Li Yongxiang,Tong Hengchao,Cao Hongtao,et al.Application of time series analysis to thermal error modeling on NC machine tools[J].Journal of Sichuan University:Engineering Science Edition,2006,38(2):74-78.[李永祥,童恒超,曹洪涛,等.数控机床热误差的时序分析法建模及其应用[J].四川大学学报:工程科学版,2006,38(2):74-78.]

Eberhart R,Kennedy J.A new optimizer using particle swarm theory[C]//Proceedings of the Sixth International Symposium on Micro Machine and Human Science.Piscataway.NJ:IEEE Service Center,1995:39-43.

Kennedy J,Eberhart R.Particle swarm optimization[C]//IEEE International Conference on Neural Networks.Perth,Australia,1995:1942-1948.

Chau K W.Application of a PSO-based neural network in analysis of outcomes of construction claims[J].Automation in Construction,2007,16:642-646.

Sugisaka Masanori,Fan Xinjian.An effective search method for NN-based face detection using PSO[C]//SICE Annual Conference in Sapporo.2004:2742-2745.

Shi Y,Eberhart R.Parameter selection in particle swarm optimization[C]//Proceeding of the 7th Annual Conference on Evolutionary Programming.New York,1998:591-600.

浏览量

322

下载量

CNKI被引量

文章被引用时，请邮件提醒。

提交

工具集

关联资源

水光互补日内优化运行策略